Current Position:
Drill bits - Taps & dies - Hand tap - hand tap

 

Hand taps
Norm: DIN352, 3pcs/set
Material: HSS
Size	Pitch	Overall Length	Thread Length		Size	Pitch	Overall Length	Thread Length
M3	0.5	40	10		M20	2.5	95	40
M4	0.7	45	12		M22	2.5	100	40
M5	0.8	50	14		M24	3	110	50
M6	1	50	16		M27	3	110	50
M7	1	50	18		M30	3.5	125	56
M8	1.25	56	22		M33	3.5	125	56
M9	1.25	63	22		M36	4	150	63
M10	1.5	70	24		M39	4	150	63
M12	1.75	75	29		M42	4.5	150	63
M14	2	80	30		M45	4.5	160	70
M16	2	80	32		M48	5	180	75
M18	2.5	95	40		M52	5	180	75



Hand taps
Norm: DIN2181, 2pcs/set
Material: HSS
Size	Pitch	Overall Length	Thread Length		Size	Pitch	Overall Length	Thread Length
M3	0.35	40	9		M20	1	80	22
M3.5	0.35	45	10		M20	1.5	80	22
M4	0.35	45	10		M20	2	80	22
M4	0.5	45	12		M22	1	80	22
M5	0.5	50	14		M22	1.5	80	22
M6	0.5	50	14		M22	2	80	22
M6	0.75	50	14		M24	1	90	22
M7	0.75	50	19		M24	1.5	90	22
M8	0.5	50	19		M24	2	90	22
M8	0.75	50	22		M26	1.5	90	22
M8	1	63	22		M27	1.5	90	22
M9	1	63	20		M27	2	90	22
M10	0.75	63	20		M28	1.5	90	22
M10	1	70	24		M30	1	90	22
M10	1.25	63	22		M30	1.5	90	22
M11	1	70	22		M30	2	90	22
M12	1	70	22		M32	1.5	90	22
M12	1.25	70	22		M33	1.5	100	25
M12	1.5	70	22		M34	1.5	100	25
M14	1	70	22		M35	1.5	100	25
M14	1.25	70	22		M36	1.5	100	25
M14	1.5	70	22		M36	3	125	40
M15	1	70	22		M38	1.5	100	25
M15	1.5	70	22		M40	1.5	110	25
M16	1	70	22		M42	1.5	110	24
M16	1.5	70	22		M45	1.5	110	25
M18	1	80	22		M48	1.5	140	40
M18	1.5	80	22		M52	1.5	140	40
M18	2	80	22

 



Hand taps,
Norm: ASME /ANSI B94.9, 3pcs/set
Material: HSS Ground thread, Carbon steel cut thread.
Size	Pitch T.P.I	Overall Length	Thread Length	Size	Pitch T.P.I	Overall Length	Thread Length
0-80	80UNF	1-5/8"	5/16"	3/8-16	16UNC	2-15/16"	1-1/4"
1-64	64UNC	1-11/16"	3/8"	3/8-24	24UNF	2-15/16"	1-1/4"
1-72	72UNF	1-11/16"	3/8"	7/16-14	14UNC	3-5/32"	1-7/16"
2-56	56UNC	1-3/4"	7/16"	7/16-20	UNF	3-5/32"	1-7/16"
2-64	64UNF	1-3/4"	7/16"	1/2-13	13UNC	3-3/8"	1-21/32"
3-48	48UNC	1-13/16"	1/2"	1/2-20	20UNF	3-3/8"	1-21/32"
3-56	56UNF	1-13/16"	1/2"	9/16-12	12UNC	3-19/32"	1-21/32"
4-40	40UNC	1-7/8"	9/16"	9/16-18	18UNF	3-19/32"	1-21/32"
4-48	48UNF	1-7/8"	9/16"	5/8-11	11UNC	3-13/16"	1-13/16"
4-36	36UNS	1-7/8"	9/16"	5/8-18	18UNF	3-13/16"	1-13/16"
5-40	40UNC	1-15/16"	5/8"	3/4-10	10UNC	4-1/2"	2"
5-44	44UNF	1/15/16"	5/8"	3/4-16	18UNF	4-1/2"	2"
6-32	32UNC	2"	11/16"	7/8-9	9UNC	4-11/16"	2-7/32"
6-40	40UNF	2"	11/16"	7/8-14	14UNF	4-11/16"	2-7/32"
8-32	32UNC	2-1/8"	3/4"	1-8	8UNC	5-1/8"	2-1/2"
8-36	36UNF	2-1/8"	3/4"	1-12	12UNF	5-1/8"	2-1/2"
10-24	24UNC	2-3/8"	7/8"	1.1/8-7	7UNC	5-7/16"	2-9/16"
10-32	32UNF	2-3/8"	7/8"	1.1/8-12	12UNF	5-7/16"	2-9/16"
12-20	20UNC	2-3/8"	15/16"	1.1/4-7	7UNC	5-3/4"	2-9/16"
12-28	28UNF	2-3/8"	15/16"	1.1/4-12	12UNF	5-3/4"	2-9/16"
1/4-20	20UNC	2-1/2"	1"	1.3/8-6	6UNC	6-1/16"	3"
1/4-28	28UNF	2-1/2"	1"	1.3/8-12	12UNF	6-1/16"	3"
5/16-18	18UNC	2-23/32"	1-1/8"	1.1/2-6	6UNC	6-3/8"	3"
5/16-24	24UNF	2-23/32"	1-1/8"	1.1/2-12	12UNF	6-3/8"	3"
BSW hand taps
Norm: DIN351, 3pcs/set
Material: HSS, Ground thread
Size	Pitch T.P.I	Overall Length	Thread Length	Size	Pitch T.P.I	Overall Length	Thread Length
1/16"	60	32	10	5/8"	11	90	36
3/32"	48	36	11	3/4"	10	105	40
1/8"	40	40	12	7/8"	9	110	45
5/32"	32	45	12	1"	8	110	50
3/16"	24	50	18	1-1/8"	7	132	56
7/32"	24	50	18	1-1/4"	7	132	56
1/4"	20	56	22	1-3/8"	6	150	63
5/16"	18	63	25	1-1/2"	6	150	63
3/8"	16	70	28	1-5/8"	5	160	70
7/16"	14	75	30	1-3/4"	5	160	70
1/2"	12	80	32	1-7/8"	4-1/2	190	80
9/16"	12	80	32	2"	4-1/2	190	80